My Part Number:
Part Number: A06-M4
Manufacturer Code: 2101110
Multiples of: 1 | Minimum Order: 1
COPPER TUBE CRIMPING LUGS
A-M series lugs are manufactured from electrolytic copper tube Cu-OF CW008A conform to UNI EN 13600.
The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
Cembre lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation.
In applications subject to vibration, lugs still have to provide a reliable connection and annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.
The presence of an inspection hole facilitates full insertion of the conductor, whilst the barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation. Lugs are electrolytically tinplated to avoid oxidation.
Each connector is marked as follows:
• Cembre trade mark and reference number.
• Nature and size of conductor (mm2).
• Ø stud (mm).
Width: 7.5 mm
Length: 18 mm
Diameter: 2.4 mm
Diameter of the hole: 4.3 mm
M: 5 mm
N: 4 mm
Ø Stud mm: 4 mm
Material (Body): ETP electrolytic tinned Copper
Material (Seam): ETP electrolytic tinned Copper
Brand |
CEMBRE |
|
£33.95
per 100 (ex. VAT)£40.74
per 100 (inc. VAT)
COPPER TUBE CRIMPING LUGS
A-M series lugs are manufactured from electrolytic copper tube Cu-OF CW008A conform to UNI EN 13600.
The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
Cembre lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation.
In applications subject to vibration, lugs still have to provide a reliable connection and annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.
The presence of an inspection hole facilitates full insertion of the conductor, whilst the barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation. Lugs are electrolytically tinplated to avoid oxidation.
Each connector is marked as follows:
• Cembre trade mark and reference number.
• Nature and size of conductor (mm2).
• Ø stud (mm).
Width: 7.5 mm
Length: 18 mm
Diameter: 2.4 mm
Diameter of the hole: 4.3 mm
M: 5 mm
N: 4 mm
Ø Stud mm: 4 mm
Material (Body): ETP electrolytic tinned Copper
Material (Seam): ETP electrolytic tinned Copper
Brand |
CEMBRE |
|
