My Part Number:
Part Number: A100-M12
Manufacturer Code: 2370010
Multiples of: 1 | Minimum Order: 1
RING TERMINAL, FOR COPPER CONDUCTORS
A-M series lugs are manufactured from electrolytic Copper tube with a purity greater than 99.9%. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. CEMBRE lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation. In applications subject to vibration, lugs still have to provide a reliable connection and annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.
The presence of an inspection hole facilitates full insertion of the conductor, whilst the barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation. Lugs are electrolytically Tin plated to avoid oxidation.
Minimum operating temperature: -50 °C
Maximum operating temperature: 150 °C
Spy hole: Yes
Narrow connection: No
Bend angle of the connection: 0°
Number of holes on the palm: 1
Markings found; factory mark; cembre catalogue number; conductor section and nature; screw diameter
Typology: single
Easy insertion input: Yes
Barrel type: closed
Grease inside the barrel: No
Filler putty: No
Brand |
CEMBRE |
|
£4,205.00
per 100 (ex. VAT)£5,046.00
per 100 (inc. VAT)
RING TERMINAL, FOR COPPER CONDUCTORS
A-M series lugs are manufactured from electrolytic Copper tube with a purity greater than 99.9%. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. CEMBRE lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation. In applications subject to vibration, lugs still have to provide a reliable connection and annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.
The presence of an inspection hole facilitates full insertion of the conductor, whilst the barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation. Lugs are electrolytically Tin plated to avoid oxidation.
Minimum operating temperature: -50 °C
Maximum operating temperature: 150 °C
Spy hole: Yes
Narrow connection: No
Bend angle of the connection: 0°
Number of holes on the palm: 1
Markings found; factory mark; cembre catalogue number; conductor section and nature; screw diameter
Typology: single
Easy insertion input: Yes
Barrel type: closed
Grease inside the barrel: No
Filler putty: No
Brand |
CEMBRE |
|
