ENCLOSURE

Eaton Moeller® series CI-K Insulated enclosure

PRODUCT SPECIFICATIONS

Rated Operational Current for Specified Heat Dissipation (IN): 0 A
10.11 Short-Circuit Rating: Is the panel builder's responsibility. The specifications for the switchgear must be observed.
Enclosure Colour: Light gray, Cover (RAL 7035)
Light gray, Operator (RAL 7035)
Black (RAL 9005)
Temperature Resistance: -40 - 120 °C (enclosure)
-40 - 80 °C (gasket)
10.4 Clearances and Creepage Distances: Meets the product standard's requirements.
10.12 Electromagnetic Compatibility: Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.2.5 Lifting: Not applicable.
Dielectric Strength: 30 kV/mm, according to IEC 60243-1
10.2.3.1 Verification of Thermal Stability of Enclosures: Meets the product standard's requirements.
Fitted With: Control cable entry
Mounting rail to IEC/EN 60715
Degree of Protection (Front Side): IP65
10.8 Connections for External Conductors: Is the panel builder's responsibility.
Environmental Resistance: Chemical resistant (Push-through membrane (CI-K1/CI-K2) and sealing material)
Not resistant to Mineral oil
Not resistant to benzene
Partly resistant to benzene
Partly resistant to acids (> 10%)
Resistant against benzene
Resistant against greases
Chemical resistant (Base, Cover)
Resistant against acids (< 10%)
Partly resistant to greases
Resistant against gasoline
Partly resistant to alcohol
Resistant against alcohol
Resistant against salt solutions
Resistant against mineral oil
Resistant against alkalis
Not resistant to alkalis
Ambient Operating Temperature – MAX: 70 °C
Track Resistance: CTI 175 (base, to IEC 60112)
CTI 175 (cover, to IEC 60112)
Climatic Proofing: Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Features: Halogen free
UV resistance beneath protective shield
Static Heat Dissipation, Non-Current-Dependent PVS: 0 W
10.9.3 Impulse Withstand Voltage: Is the panel builder's responsibility.
Knockouts: Metric cable entry knockouts at the top, bottom and back plate
Push-through cable entry diaphragm
Ambient Operating Temperature – MIN: -25 °C
10.6 Incorporation of switching Devices and Components: Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection Against Electric Shock: Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical Function: The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.6 Mechanical Impact: Does not apply, since the entire switchgear needs to be evaluated.
10.9.4 Testing of Enclosures Made of Insulating Material: Meets the product standard's requirements.
10.3 Degree of Protection of Assemblies: Meets the product standard's requirements.
Heat Dissipation Per Pole, Current-Dependent PVID: 0 W
Water Consumption: 0.29 % (According to DIN EN ISO 62)
Mounting Weight Capacity – MAX: .7 kg
Product Category: Empty enclosures
Small enclosures
Equipment Heat Dissipation, Current-Dependent PVID: 0 W
Heat Dissipation Capacity Pdiss: 12.5 W
Suitable for: Emergency stop
Flammability Characteristics: 960 °C/1 mm thickness (base, cover; glow wire to VDE 0471 Part 2)
650 °C/1 mm thick (push-through membrane and seal material) to VDE 0471 Part 2)
Cover Material: Glass-fiber reinforced polycarbonate
10.2.3.2 Verification of Resistance of Insulating Materials to Normal Heat: Meets the product standard's requirements.
10.2.3.3 Resist. of Insul. Mat. to Abnormal Heat/Fire by Internal Elect. Effects: Meets the product standard's requirements.
Impact Resistance: IK06 (according to EN 50102)
10.9.2 Power-Frequency Electric Strength: Is the panel builder's responsibility.
Degree of Protection: IP65, with push-through cable entry
10.7 Internal Electrical Circuits and Connections: Is the panel builder's responsibility.
10.10 Temperature Rise: The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Mounting Depth: 73 mm
Enclosure Material: Plastic
1 Ω x 10¹³ (Surface resistance to IEC 60093)
Type: Basic enclosure
10.2.2 Corrosion Resistance: Meets the product standard's requirements.
10.2.4 Resistance to Ultra-Violet (UV) Radiation: Please enquire
10.2.7 Inscriptions: Meets the product standard's requirements.
Radiated Heat Dissipation with Separate Mounting: 12.5 W (at an ambient temperature of 20 °C)
Surface Treatment: Resistant to corrosion
Model: Surface mounting