25A 2P NC CONTACTOR C/V 240V AC

Contactor CT - 2 poles - 2 NC - 25 A - 230..240 V AC

Product or component type: Contactor
Device application: Control circuit
Poles: 2P
[Ie] rated operational current: 25 A AC-7A
Pole contact composition: 2 NC
Network type: AC
Control type: Remote control
[Uc] control circuit voltage: 230/240 V AC 50 Hz
Network frequency: 50 Hz
[Ue] rated operational voltage: 250 V AC 50 Hz
Maximum power: 3 W at 250 V AC
Control signal type: Maintained
Local signalling: Colour indicator
Hold-in power consumption in VA: 2.7 VA
Inrush power in VA: 9.2 VA
Mounting mode: Clip-on
Mounting support: 35 mm symmetrical DIN rail
9 mm pitches: 2
Height: 81 mm
Width: 18 mm
Depth: 60 mm
Colour: Grey
Mechanical durability: 1000000 cycles
Electrical durability: 30000 cycles EN/IEC 60947-4-1 50 Hz AC-3, 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5A
Connections - terminals: Power circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible, Power circuit: tunnel type terminals1 cable(s) 6 mm² rigid, Control circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible, Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid
Product compatibility: Mixed control - impulse/latched, Auxiliary contact, Interference filter, Time delay
Compatibility code: CT