100A 2P NO CONTACTORC/V 240V AC

Contactor CT - 2 poles - 2 NO - 100 A - 220..240 V AC

Product or component type: Contactor
Device application: Control circuit
Poles: 2P
[Ie] rated operational current: 100 A AC-7A
Pole contact composition: 2 NO
Network type: AC
Utilisation category: AC-1 conforming to IEC 60947-4, AC-3 conforming to IEC 60947-4, AC-7A conforming to IEC 61095, AC-7B conforming to IEC 61095
Control type: Remote control
[Uc] control circuit voltage: 220/240 V AC 50 Hz
Network frequency: 50 Hz
[Ue] rated operational voltage: 250 V AC 50 Hz
Maximum power: 8 W at 250 V AC
Control signal type: Maintained
Local signalling: Colour indicator
Hold-in power consumption in VA: 6.5 VA
Inrush power in VA: 53 VA
Mounting mode: Clip-on
Mounting support: 35 mm symmetrical DIN rail
9 mm pitches: 6
Height: 81 mm
Width: 18 mm
Depth: 60 mm
Colour: Grey
Connections - terminals: Control circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible, Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid, Power circuit: tunnel type terminals2 cable(s) 35 mm² flexible, Power circuit: tunnel type terminals1 cable(s) 50 mm² rigid
Product compatibility: Auxiliary contact, Time delay, Interference filter, Mixed control: impulse/latched
Compatibility code: CT