My Part Number:
Part Number: LFL2-BK-U-PUR10-EMS
Manufacturer Code: 288564
Multiples of: 1 | Minimum Order: 1
Float Switch LFL2-BK-U-PUR10-EMS
• Switch element: microswitch, mercury-free
• Limit value detection for fluids
• Ball design: high buoyancy
Electrical specifications
Contact loading: 250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load
Rated insulation voltage: 300 V
Pulse withstand voltage: 4 kV
Electrical life: ≥ 5 x 104 switching cycles
Directive conformity
Low voltage
Directive 2014/35/EU: EN 60947-5-1:2004 + Cor.:2005 + A1:2009
Conformity
Degree of protection: IEC 60529:2001
Application
Description: microswitch with switching ball, change-over contact
Function and system design
Equipment architecture: This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.
Operating conditions
Installation conditions
Installation instructions: range of application and minimum length between mounting and float: ≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluids
mounting: The float switch is mounted by means of a counter weight or rods (e. g. float switch combination) from the top. The pivot of the cable should always be horizontal.
Process conditions
Process pressure (static pressure): ≤ 2 bar (29 psi) at 20 °C (68 °F)
Density: ≥ 0.6 g/cm3
Ambient conditions
Ambient temperature: 5 ... 70 °C (41 ... 158 °F)
Storage temperature: -25 ... 70 °C (-13 ... 158 °F)
Altitude: ≤ 2000 m above MSL
Mechanical specifications
Degree of protection: IP68
Cable
Length: 10 m
Mechanical construction
Material float: PP (Polypropylene), cable: PUR, highly flexible (3 x 0.50 mm2)
Switching point: switch angle, measured against the horizontal:
- upper switch point +25° ±10°
- lower switch point -14° ±10°
Brand |
PEPPERL & FUCHS |
|
£84.87
per 1 (ex. VAT)£101.84
per 1 (inc. VAT)
Float Switch LFL2-BK-U-PUR10-EMS
• Switch element: microswitch, mercury-free
• Limit value detection for fluids
• Ball design: high buoyancy
Electrical specifications
Contact loading: 250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load
Rated insulation voltage: 300 V
Pulse withstand voltage: 4 kV
Electrical life: ≥ 5 x 104 switching cycles
Directive conformity
Low voltage
Directive 2014/35/EU: EN 60947-5-1:2004 + Cor.:2005 + A1:2009
Conformity
Degree of protection: IEC 60529:2001
Application
Description: microswitch with switching ball, change-over contact
Function and system design
Equipment architecture: This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.
Operating conditions
Installation conditions
Installation instructions: range of application and minimum length between mounting and float: ≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluids
mounting: The float switch is mounted by means of a counter weight or rods (e. g. float switch combination) from the top. The pivot of the cable should always be horizontal.
Process conditions
Process pressure (static pressure): ≤ 2 bar (29 psi) at 20 °C (68 °F)
Density: ≥ 0.6 g/cm3
Ambient conditions
Ambient temperature: 5 ... 70 °C (41 ... 158 °F)
Storage temperature: -25 ... 70 °C (-13 ... 158 °F)
Altitude: ≤ 2000 m above MSL
Mechanical specifications
Degree of protection: IP68
Cable
Length: 10 m
Mechanical construction
Material float: PP (Polypropylene), cable: PUR, highly flexible (3 x 0.50 mm2)
Switching point: switch angle, measured against the horizontal:
- upper switch point +25° ±10°
- lower switch point -14° ±10°
Brand |
PEPPERL & FUCHS |
|
