MAG.PROX.SW.70MM NAMUR-M12P/IN

Magnetic field sensor MMB70-12GH50-1N-V1


General specifications
Switching function: Normally open (NO)
Output type: NAMUR
Rated operating distance: 5 ... 70 mm
Installation: flush in non-magnetic metal
Output type: 2-wire

Nominal ratings
Nominal voltage: 8.2 V (Ri approx. 1 kΩ)
Switching frequency: 0 ... 1000 Hz
Current consumption
Magnet detected: ≥ 2.5 mA
Magnet not detected: ≤ 1 mA
Switching state indicator: LED, yellow

Functional safety related parameters
MTTFd: 2828 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %

Compliance with standards and directives
Standard conformity
NAMUR: EN 60947-5-6:2000
Standards: EN 60947-5-2:2007
EN 60947-5-2/A1:2012

Approvals and certificates
IECEx approval
Equipment protection level Ga: IECEx TUN 20.0007
Equipment protection level Da: IECEx TUN 20.0007
ATEX approval
Equipment protection level Ga: TÜV 20 ATEX 241336
Equipment protection level Da: TÜV 20 ATEX 241336

Ambient conditions
Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)

Mechanical specifications
Connection type: Connector plug M12 x 1 , 4-pin
Housing material: Stainless steel 1.4404 / AISI 316L
Sensing face: Stainless steel 1.4404 / AISI 316L
Degree of protection: IP67