IND.PROX.SW.75MM PNP NO+NC-M12

Inductive sensor NRN75-FP-A2-P3-V1

• 75 mm non-flush
• Reduction factor = 1

General specifications
Switching function: complementary
Output type: PNP
Rated operating distance: 75 mm
Installation: non-flush
Output polarity: DC
Assured operating distance: 0 ... 55 mm
Reduction factor rAl: 1
Reduction factor rCu: 1
Reduction factor r304: 1
Reduction factor rSt37: 1
Output type: 4-wire

Nominal ratings
Operating voltage: 10 ... 30 V DC
Switching frequency: 0 ... 50 Hz
Hysteresis: typ. 3 %
Reverse polarity protection: reverse polarity protected
Short-circuit protection: pulsing
Voltage drop: ≤ 3 V
Temperature drift: ± 10 % at 0 ... 50 °C (32 ... 122 °F), ± 20 % at -25 ... 0 °C (-13 ... 32 °F) and 50 ... 70 °C (122 ... 158 °F)
Rated insulation voltage: 50 V
Operating current: 0 ... 200 mA
Off-state current: 0 ... 0.5 mA
No-load supply current: ≤ 20 mA
Time delay before availability: ≤ 300 ms
Operating voltage indicator : LED, green
Switching state indicator: LED, yellow

Functional safety related parameters
MTTFd: 824 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %

Compliance with standards and directives
Standard conformity
Standards: EN 60947-5-2:2007, IEC 60947-5-2:2007

Approvals and certificates
UL approval: cULus Listed, General Purpose
CSA approval: cCSAus Listed, General Purpose
CCC approval: CCC approval / marking not required for products rated ≤36 V

Ambient conditions
Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)

Mechanical specifications
Connection type: Connector plug M12 x 1 , 4-pin
Housing material: PBT/metal
Sensing face: PBT
Housing base: metal
Degree of protection: IP68