DIFF.BGS 80MM 2XPUSH/PULL-M8PI

Triangulation sensor (BGS) OBT80-R102-2P1-IO-V31-IR

• Miniature design with versatile mounting options
• Best background suppressor in its class
• Precision object detection, almost irrespective of the colour
• Extended temperature range: -40 °C ... 60 °C
• High degree of protection IP69K
• IO-Link interface for service and process data


General specifications
Detection range: 10 ... 80 mm
Detection range max.: 10 ... 100 mm
Background suppression: starts from 100 mm
Reference target: standard white, 100 mm x 100 mm
Light source: LED
Light type: modulated infrared light 850 nm
LED risk group labelling: exempt group
Black-white difference (6 %/90 %): approx. 5 mm
Diameter of the light spot: approx. 6 mm at 80 mm
Opening angle: approx. 5 °
Ambient light limit: EN 60947-5-2 : 40000 Lux

Functional safety related parameters
MTTFd: 600 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %

Indicators/operating means
Operation indicator: LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Function indicator: LED yellow: constantly on - object detected, constantly off - object not detected

Electrical specifications
Operating voltage: 10 ... 30 V DC
Ripple: max. 10 %
No-load supply current: < 25 mA at 24 V supply voltage
Protection class: III

Interface
Interface type: IO-Link ( via C/Q = BK )
IO-Link revision: 1.1
Device profile: Smart Sensor
Device ID: 0x11051C (1115420)
Transfer rate: COM2 (38.4 kBit/s)
Min. cycle time: 2.3 ms
Process data width: Process data input 1 Bit, Process data output 2 Bit
SIO mode support: yes
Compatible master port type: A

Output
Switching type: C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link
/Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on,
Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage: max. 30 V DC
Switching current: max. 100 mA , resistive load
Usage category: DC-12 and DC-13
Voltage drop: ≤ 1.5 V DC
Switching frequency: 500 Hz
Response time: 1 ms

Conformity
Communication interface: IEC 61131-9
Product standard: EN 60947-5-2

Approvals and certificates
UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1

Ambient conditions
Ambient temperature: -40 ... 60 °C (-40 ... 140 °F)
Storage temperature: -40 ... 70 °C (-40 ... 158 °F)

Mechanical specifications
Housing width: 13.9 mm
Housing height: 31.9 mm
Housing depth: 18.3 mm
Degree of protection: IP67 / IP69 / IP69K
Connection: M8 x 1 connector, 4-pin
Material
Housing: PC (Polycarbonate)
Optical face: Float glass
Mass: approx. 10 g