My Part Number:
Part Number: 2717139
Manufacturer Code: DOK 1,5-2D
Multiples of: 1 | Minimum Order: 1
Sensor/actuator terminal block
Same shape as DIK ... three-level initiator terminal blocks
The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
The upper level contains the feed-through connections for the signal cable which can be labeled
Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green
Alternate wiring of an actuator followed by an initiator is easy
Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned
The middle level supplies the connected actuators with power
Connection method: Screw connection
Cross section: 0.2 mm² - 4 mm²
AWG: 24 - 12
Width: 6.2 mm
Mounting type: NS 35/7.5, NS 35/15
Colour: grey
Brand |
PHOENIX CONTACT |
|
£5.48
per 1 (ex. VAT)£6.58
per 1 (inc. VAT)
Sensor/actuator terminal block
Same shape as DIK ... three-level initiator terminal blocks
The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
The upper level contains the feed-through connections for the signal cable which can be labeled
Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green
Alternate wiring of an actuator followed by an initiator is easy
Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned
The middle level supplies the connected actuators with power
Connection method: Screw connection
Cross section: 0.2 mm² - 4 mm²
AWG: 24 - 12
Width: 6.2 mm
Mounting type: NS 35/7.5, NS 35/15
Colour: grey
Brand |
PHOENIX CONTACT |
|
