My Part Number:
Part Number: 3209015
Manufacturer Code: STIO 2.5/3-2B/L
Multiples of: 1 | Minimum Order: 1
Sensor/actuator terminal block
Nom. voltage: 250 V, nominal current: 18 A, connection method: Spring-cage connection, number of connections: 4, cross section: 0.08 mm² - 4 mm², AWG: 28 - 12, width: 5.2 mm, colour: grey, mounting type: NS 35/7,5, NS 35/15.
Three-conductor output terminal block of the same shape with PE connection in the lower level for wiring actuators
Power terminal blocks can be located at any point on the terminal strip for supply or extension purposes
Versions with LED for indicating the switching states
Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system
Potential is supplied via the STIO-IN power terminal blocks
The upper level is for signal wiring, whereas the two lower levels are used to distribute the positive and negative potential
For space and time-saving wiring of three-conductor initiators and actuators
Brand |
PHOENIX CONTACT |
|
£2.56
per 1 (ex. VAT)£3.07
per 1 (inc. VAT)
Sensor/actuator terminal block
Nom. voltage: 250 V, nominal current: 18 A, connection method: Spring-cage connection, number of connections: 4, cross section: 0.08 mm² - 4 mm², AWG: 28 - 12, width: 5.2 mm, colour: grey, mounting type: NS 35/7,5, NS 35/15.
Three-conductor output terminal block of the same shape with PE connection in the lower level for wiring actuators
Power terminal blocks can be located at any point on the terminal strip for supply or extension purposes
Versions with LED for indicating the switching states
Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system
Potential is supplied via the STIO-IN power terminal blocks
The upper level is for signal wiring, whereas the two lower levels are used to distribute the positive and negative potential
For space and time-saving wiring of three-conductor initiators and actuators
Brand |
PHOENIX CONTACT |
|
