My Part Number:
Part Number: R-KEY-LT-E
Multiples of: 1 | Minimum Order: 1
1-port EtherNet/IP -> ModBUS RTU/ASCII/TCP-IP gateway & protocol converter
SENECA offers three Ethernet/IP gateway variants that differ in form factor and number of Ethernet ports. The R-KEY-LT Ethernet/IP model is designed to simplify network communications between Modbus RTU/ASCII/TCP devices and EtherNet/IP networks. This gateway takes on the main function of acting as a Modbus master to acquire and exchange data with EtherNet/IP devices.
Concretely, the R-KEY-LT converts Modbus data into EtherNet/IP packets, enabling an EtherNet/IP scanner to control or monitor Modbus devices. In detail, the Ethernet/IP gateway works as ModBUS Master devices on the serial side and Ethernet/IP adapters on the Ethernet side. Modbus requests, such as read or write commands, are configured directly on the devices, automatically generating an EDS file. Once this file is imported into the PLC development software, all configured I/O will be accessible without further configuration. In addition, up to 3 Modbus TCP-IP servers can be connected in addition to the serial devices.
Power supply: 10..40 Vdc; 19..28 Vac
Absorption: Max 1 W
Led status indicators: Power supply, Rx / Tx RS232 / RS485, IP powered/assigned, Transmission / Ethernet connection, Ethernet/IP communication
Isolation: 1.5 kVac
Grade of protection: IP20
Operating temperature: -25..+65°C
Connections: Screw terminals, 7-way removable screw, 5mm pitch, Screw terminals, 2-way removable screw, 5mm pitch, RJJ45 connector
Ethernet ports: Nr.1 Fast Ethernet 100 Tx port, RJ45
Serial ports: Nr.1 RS232 / RS485 switchable port, max 115k baud rate on connector
Protocols supported: ModBUS RTU, ModBUS TCP-IP, ModBUS ASCII
Mode of operation: ModBUS RTU/TCP-IP/ASCII -> Ethernet/IP Gateway
Dedicated memory for commands: 512 Bytes READ and 512 bytes WRITE
Max client TCP-IP (server mode): 3
Max modbus RTU/ASCII slave nodes: 128
Dimensions (WXHXD): 53 x 90 x 32 mm
Weight: 80 g
Case: PC/ABS self-extinguishing UL94-V0
Installation: For DIN Rail (IEC EN 60715)
Certifications: CE, UKCA, UL
DIP switch: Flash memory, IP address, serial activation
Web server: Ethernet/IP parameters, ModBUS registers, firmware update, serial traffic, I/O mapping, EDS export
Configuration file: EDS
SDD (SENECA DISCOVERY DEVICE): x
Brand |
SENECA |
|
£126.36
per 1 (ex. VAT)£151.63
per 1 (inc. VAT)
1-port EtherNet/IP -> ModBUS RTU/ASCII/TCP-IP gateway & protocol converter
SENECA offers three Ethernet/IP gateway variants that differ in form factor and number of Ethernet ports. The R-KEY-LT Ethernet/IP model is designed to simplify network communications between Modbus RTU/ASCII/TCP devices and EtherNet/IP networks. This gateway takes on the main function of acting as a Modbus master to acquire and exchange data with EtherNet/IP devices.
Concretely, the R-KEY-LT converts Modbus data into EtherNet/IP packets, enabling an EtherNet/IP scanner to control or monitor Modbus devices. In detail, the Ethernet/IP gateway works as ModBUS Master devices on the serial side and Ethernet/IP adapters on the Ethernet side. Modbus requests, such as read or write commands, are configured directly on the devices, automatically generating an EDS file. Once this file is imported into the PLC development software, all configured I/O will be accessible without further configuration. In addition, up to 3 Modbus TCP-IP servers can be connected in addition to the serial devices.
Power supply: 10..40 Vdc; 19..28 Vac
Absorption: Max 1 W
Led status indicators: Power supply, Rx / Tx RS232 / RS485, IP powered/assigned, Transmission / Ethernet connection, Ethernet/IP communication
Isolation: 1.5 kVac
Grade of protection: IP20
Operating temperature: -25..+65°C
Connections: Screw terminals, 7-way removable screw, 5mm pitch, Screw terminals, 2-way removable screw, 5mm pitch, RJJ45 connector
Ethernet ports: Nr.1 Fast Ethernet 100 Tx port, RJ45
Serial ports: Nr.1 RS232 / RS485 switchable port, max 115k baud rate on connector
Protocols supported: ModBUS RTU, ModBUS TCP-IP, ModBUS ASCII
Mode of operation: ModBUS RTU/TCP-IP/ASCII -> Ethernet/IP Gateway
Dedicated memory for commands: 512 Bytes READ and 512 bytes WRITE
Max client TCP-IP (server mode): 3
Max modbus RTU/ASCII slave nodes: 128
Dimensions (WXHXD): 53 x 90 x 32 mm
Weight: 80 g
Case: PC/ABS self-extinguishing UL94-V0
Installation: For DIN Rail (IEC EN 60715)
Certifications: CE, UKCA, UL
DIP switch: Flash memory, IP address, serial activation
Web server: Ethernet/IP parameters, ModBUS registers, firmware update, serial traffic, I/O mapping, EDS export
Configuration file: EDS
SDD (SENECA DISCOVERY DEVICE): x
Brand |
SENECA |
|
