M12 MALE D-CODED

Technical Specifications

Connection type head A: Male connector, M12, 4-pin, angled, D-coded
Connection type head B: Male connector, RJ45, 4-pin, straight
Locking plug connector: Screw-on connection (M12), snap-in locking (RJ45)
Connector material: TPU
Connector colour: Black
Locking nut material: Zinc die-cast, nickel-plated
Tightening torque: 0.6 Nm
Width across flats: 13
Cable: 5 m, 4-wire, PUR, halogen-free
Jacket material: PUR, halogen-free
Jacket colour: Green
Cable diameter: 6.7 mm
Conductor cross section: 0.34 mm²
Shielding: Shielded

Bending radius
Flexible use: > 12 x cable diameter
Stationary position: > 5 x cable diameter
Drag chain operation: > 12 x cable diameter

Bending cycles: 3,000,000
Nominal voltage, cable: 300 V AC
Test voltage, cable: 2,000 V AC

Reference voltage
48 V AC
60 V DC

Rated impulse voltage: 1 kV
Current loading: 1.5 A
Traversing speed: 3.3 m/s
Travelling distance: 5 m
Acceleration: ≤ 2 m/s²
Signal type: Ethernet, PROFINET
Transmission characteristics: CAT5e
Data transmission rate: ≤ 0.1 Gbit/s
Application: Drag chain operation, Zones with oils and lubricants
Enclosure rating: IP67 (M12), IP20 (RJ45)

Operating temperature
Flexible use: –30 °C ... +70 °C
Stationary position: –40 °C ... +80 °C
Drag chain operation: –30 °C ... +70 °C
Head: –25 °C ... +85 °C

Contamination rating: 3
Insulation resistance: > 100 MΩ
Overvoltage category: III
Specific insulation resistance: < 30 mΩ
Thermal resistance, piping: Flame retardant acc. to UL 1581 Section 1090, Section 1100 (FT2), IEC 60332-1-2 Std.