My Part Number:
Part Number: CSF06012.0-00
Manufacturer Code: 06012.0-00
Multiples of: 1 | Minimum Order: 1
ENCLOSURE HEATER
CSF 060 | 100 W
The compact PTC enclosure heater with integrated, tamper-proof thermostat for guaranteed protection against condensation inside control cabinets and enclosures. Practical: the integrated, pre-set thermostat makes an external thermostat superfluous. Two proven pre-sets are available (switch-off and switch-on temperature: +15 °C and 5 °C; +25 °C and 15 °C).
• With integrated tamper-proof thermostat
• Safe to touch, low surface temperature
• Quick to mount onto DIN rail 35 mm
• This enclosure heater is designed for long-term use
• PTC heating element
Operating voltage: AC 120 - 240 V¹ (min. 110 V, max. 265 V)
Heating element: PTC resistor - temperature limiting
Surface temperature: < +80 °C (+176 °F), except upper protective grille
Connection: 2-pole terminal 2.5mm², torque 0.8 Nm max.
Casing: plastic according to UL94 V-0, black
Mounting: clip for 35mm DIN rail, EN 60715
Fitting position: vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature: -40 to +70 °C (-40 to +158 °F) / -45 to +70 °C (-49 to +158 °F)
Operating/Storage humidity: < 90 % rF (non-condensing)
Protection type/Protection class: IP20 / II (double insulated)
Approvals: UL File No. E150057, VDE, EAC
Brand |
STEGO |
|
£66.76
per 1 (ex. VAT)£80.11
per 1 (inc. VAT)
ENCLOSURE HEATER
CSF 060 | 100 W
The compact PTC enclosure heater with integrated, tamper-proof thermostat for guaranteed protection against condensation inside control cabinets and enclosures. Practical: the integrated, pre-set thermostat makes an external thermostat superfluous. Two proven pre-sets are available (switch-off and switch-on temperature: +15 °C and 5 °C; +25 °C and 15 °C).
• With integrated tamper-proof thermostat
• Safe to touch, low surface temperature
• Quick to mount onto DIN rail 35 mm
• This enclosure heater is designed for long-term use
• PTC heating element
Operating voltage: AC 120 - 240 V¹ (min. 110 V, max. 265 V)
Heating element: PTC resistor - temperature limiting
Surface temperature: < +80 °C (+176 °F), except upper protective grille
Connection: 2-pole terminal 2.5mm², torque 0.8 Nm max.
Casing: plastic according to UL94 V-0, black
Mounting: clip for 35mm DIN rail, EN 60715
Fitting position: vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature: -40 to +70 °C (-40 to +158 °F) / -45 to +70 °C (-49 to +158 °F)
Operating/Storage humidity: < 90 % rF (non-condensing)
Protection type/Protection class: IP20 / II (double insulated)
Approvals: UL File No. E150057, VDE, EAC
Brand |
STEGO |
|
