My Part Number:
Part Number: 750-362
Manufacturer Code: 750-362
Multiples of: 1 | Minimum Order: 1
Fieldbus Coupler Modbus TCP - 4th generation
The 750-362 Modbus TCP/UDP Fieldbus Coupler connects ETHERNET to the modular WAGO I/O System.
The fieldbus coupler detects all connected I/O modules and creates a local process image.
Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches or hubs.
Both interfaces support autonegotiation and Auto-MDI(X).
The DIP switch configures the last byte of the IP address and may be used for IP address assignment (DHCP, BootP, static).
The coupler is designed for fieldbus communication in MODBUS networks.
It also supports a wide variety of standard ETHERNET protocols (e.g., HTTP(S), BootP, DHCP, DNS, SNMP, (S)FTP). An integrated Webserver provides user configuration options, while displaying the coupler's status information.
The system supply is provided directly by the coupler. The field supply is provided via a separate supply module.
Communication: Modbus (TCP, UDP)
ETHERNET protocols: HTTP(S), BootP, DHCP, DNS, SNTP, FTP(S), SNMP
Baud rate: 10/100 Mbit/s
Transmission medium: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Transmission performance: Class D per EN 50173
Number of modules per node (max.): 250
Number of modules without a bus extension (max.): 64
Input and output process image (fieldbus) max.: 1020 words/1020 words
Supply voltage (system): 24 VDC (-25 … +30 %); via pluggable connector
Current consumption (5 V system supply): 350mA
Total current (system supply): 700mA
Input current (typ.): 280mA
Power supply efficiency (typ.) at nominal load (24 V): 90%
Isolation: 500 V system/field
Indicators: LED (LINK/ACT) green: Network connection via ports 1 … 2; LED (MS, NS) red/green: Status of node, network; LED (I/O) red/green/orange: Status of local data bus
Brand |
WAGO |
|
£268.94
per 1 (ex. VAT)£322.73
per 1 (inc. VAT)
Fieldbus Coupler Modbus TCP - 4th generation
The 750-362 Modbus TCP/UDP Fieldbus Coupler connects ETHERNET to the modular WAGO I/O System.
The fieldbus coupler detects all connected I/O modules and creates a local process image.
Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches or hubs.
Both interfaces support autonegotiation and Auto-MDI(X).
The DIP switch configures the last byte of the IP address and may be used for IP address assignment (DHCP, BootP, static).
The coupler is designed for fieldbus communication in MODBUS networks.
It also supports a wide variety of standard ETHERNET protocols (e.g., HTTP(S), BootP, DHCP, DNS, SNMP, (S)FTP). An integrated Webserver provides user configuration options, while displaying the coupler's status information.
The system supply is provided directly by the coupler. The field supply is provided via a separate supply module.
Communication: Modbus (TCP, UDP)
ETHERNET protocols: HTTP(S), BootP, DHCP, DNS, SNTP, FTP(S), SNMP
Baud rate: 10/100 Mbit/s
Transmission medium: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Transmission performance: Class D per EN 50173
Number of modules per node (max.): 250
Number of modules without a bus extension (max.): 64
Input and output process image (fieldbus) max.: 1020 words/1020 words
Supply voltage (system): 24 VDC (-25 … +30 %); via pluggable connector
Current consumption (5 V system supply): 350mA
Total current (system supply): 700mA
Input current (typ.): 280mA
Power supply efficiency (typ.) at nominal load (24 V): 90%
Isolation: 500 V system/field
Indicators: LED (LINK/ACT) green: Network connection via ports 1 … 2; LED (MS, NS) red/green: Status of node, network; LED (I/O) red/green/orange: Status of local data bus
Brand |
WAGO |
|
