8 CH AI/P 0/4-20MA S/END

8-channel analog input - 0/4-20 mA, Single-ended


This analog input module processes standard 0–20 mA, 4–20 mA and 3.6–21 mA (Namur NE43) signals. The module provides a 24 V power supply for a direct connection to 2-wire sensors.
The input signal is electrically isolated and is transmitted with a resolution of 12 bits. Wire break, short circuit and out-of-measurement range are indicated by a red LED. Unused channels can be deactivated.

The module can be configured via WAGO‐I/O‐CHECK or GSD files. It features an extremely compact design and low measurement errors.

Number of analog inputs: 8
Total number of channels (module): 8
Signal type: Current
Signal type: 0 … 20 mADC; 4 … 20 mADC; 3.6 … 21 mADC
Signal type: yes
Sensor connection: 8 x (2-wire)
Input voltage (max.): 31.2 V
Resolution [bit]: 12Bit
Input resistance (max.): 220Ω
Data width: 8 x 16-bit data; 8 x 8-bit control/status (optional)
Conversion time (typ.): 10ms
Measurement error (reference temperature): 25°C
Measurement error, deviation (max.) from the upper-range value: 0.1%
Temperature error (max.) of the upper-range value: 0.01%/K
Configuration options: WAGO-I/O-CHECK, CODESYS Library, e!COCKPIT
Supply voltage (system): 5 VDC; via data contacts
Current consumption (5 V system supply): 69mA
Supply voltage (field): 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Isolation: 500 V system/field
Indicators: LED (1-8) green: Status AI 1 … AI 8; LED (9-16) red: Error AI 1 … AI 8
Number of incoming power jumper contacts: 2
Number of outgoing power jumper contacts: 2