My Part Number:
Part Number: 750-564
Manufacturer Code: 750-564
Multiples of: 1 | Minimum Order: 1
4-channel analog output - Voltage/Current
The analog output module provides a variety of standardized signals for voltage and current. The output signal can be parameterized channel by channel. The output signal is electrically isolated and transmitted with a resolution of 16 bits.
Both the internal system and field side supply power the module. Wire break, overload and insufficient field supply, are diagnosed and displayed. The module is protected against wrong wiring (feedback).
Voltage outputs can optionally be connected in 4-wire technology via the sense lines.
The module can be configured via GSD file, e!COCKPIT and WAGO-I/O-CHECK.
Number of analog outputs: 4
Total number of channels (module): 4
Signal type: Voltage, Current
Signal type: 0 … 10 mA; 2 … 10 mA; -10 … +10 mA; 0 … 20 mA; 4 … 20 mA; -20 … +20 mA; 0 … 22 mA; -22 … +22 mA; 0 … 12 mA; -12 … +12 mA
Signal type: 0 … 5 V; 1 … 5 V; -5 … +5 V; 0 … 10 V; 2 … 10 V; -10 … +10 V; 0 … 12 V; -12 … +12 V
Actuator connection: 4 x (2-wire); Voltage outputs can optionally be connected in 4-wire technology via the sense lines.
Resolution [bit]: 16Bit
Data width: 4 x 16-bit data; 4 x 8-bit control/status (optional)
Load impedance (voltage output): ≥ 1 kΩ
Load impedance (current output): ≤ 600 Ω
Conversion time (typ.): 3ms
Reference for measurement error: Voltage/Current
Output error, reference temperature: 25.°C
Output error, deviation (max.) of the upper-range value: 0.05%
Temperature coefficient: U: ±25 ppm/K of the upper-range value; I: ±50 ppm/K of the upper-range value
Configuration options: WAGO-I/O-CHECK, CODESYS Library, e!COCKPIT
Supply voltage (system): 5 VDC; via data contacts
Current consumption (5 V system supply): 55mA
Supply voltage (field): 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Isolation: 500 V system/field
Indicators: LED (1-4) green: Status AO 1 … AO 4; LED (9-12) red: Error AO 1 … AO 4
Number of incoming power jumper contacts: 2
Number of outgoing power jumper contacts: 2
Brand |
WAGO |
|
£334.44
per 1 (ex. VAT)£401.33
per 1 (inc. VAT)
4-channel analog output - Voltage/Current
The analog output module provides a variety of standardized signals for voltage and current. The output signal can be parameterized channel by channel. The output signal is electrically isolated and transmitted with a resolution of 16 bits.
Both the internal system and field side supply power the module. Wire break, overload and insufficient field supply, are diagnosed and displayed. The module is protected against wrong wiring (feedback).
Voltage outputs can optionally be connected in 4-wire technology via the sense lines.
The module can be configured via GSD file, e!COCKPIT and WAGO-I/O-CHECK.
Number of analog outputs: 4
Total number of channels (module): 4
Signal type: Voltage, Current
Signal type: 0 … 10 mA; 2 … 10 mA; -10 … +10 mA; 0 … 20 mA; 4 … 20 mA; -20 … +20 mA; 0 … 22 mA; -22 … +22 mA; 0 … 12 mA; -12 … +12 mA
Signal type: 0 … 5 V; 1 … 5 V; -5 … +5 V; 0 … 10 V; 2 … 10 V; -10 … +10 V; 0 … 12 V; -12 … +12 V
Actuator connection: 4 x (2-wire); Voltage outputs can optionally be connected in 4-wire technology via the sense lines.
Resolution [bit]: 16Bit
Data width: 4 x 16-bit data; 4 x 8-bit control/status (optional)
Load impedance (voltage output): ≥ 1 kΩ
Load impedance (current output): ≤ 600 Ω
Conversion time (typ.): 3ms
Reference for measurement error: Voltage/Current
Output error, reference temperature: 25.°C
Output error, deviation (max.) of the upper-range value: 0.05%
Temperature coefficient: U: ±25 ppm/K of the upper-range value; I: ±50 ppm/K of the upper-range value
Configuration options: WAGO-I/O-CHECK, CODESYS Library, e!COCKPIT
Supply voltage (system): 5 VDC; via data contacts
Current consumption (5 V system supply): 55mA
Supply voltage (field): 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Isolation: 500 V system/field
Indicators: LED (1-4) green: Status AO 1 … AO 4; LED (9-12) red: Error AO 1 … AO 4
Number of incoming power jumper contacts: 2
Number of outgoing power jumper contacts: 2
Brand |
WAGO |
|
