My Part Number:
Part Number: 750-586
Manufacturer Code: 750-586
Multiples of: 1 | Minimum Order: 1
2-channel analog output - 4 … 20 mA, Intrinsically safe
This analog output module transmits intrinsically safe 4–20 mA signals in Zone 0+1 hazardous areas. The WAGO I/O System 750 must be installed either in Zone 2 or in a non-hazardous area.
Power is derived from the power jumper contacts. The outputs are short-circuit-protected.
Indicators:
• Green LED (output status)
Field and system levels are electrically isolated.
Number of analog outputs: 2
Total number of channels (module): 2
Signal type: Current
Signal type: 4 … 20 mADC
Actuator connection: 2 x (2-wire)
Signal characteristics: Single-ended
Resolution [bit]: 12Bit
Conversion time (typ.): 2ms
Linearity: ± 2 LSB
Output error, reference temperature: 25.°C
Output error, deviation (max.) of the upper-range value: 0.2%
Temperature coefficient: 0.01%/K
Load impedance (current output): ≤ 500 Ω
Intrinsic safety Ex i: Yes
Data width: 2 x 16-bit data
Supply voltage (system): 5 VDC; via data contacts
Current consumption (5 V system supply): 21mA
Supply voltage (field): 24 VDC; (Ex i power supply: UO = max. 27.3 V); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Current consumption, field supply (module with no external load): 19mA
Power consumption Pmax.: 1.5 W
Power loss Pl: 0.9 W
Isolation: 300 VAC system/supply
Number of incoming power jumper contacts: 2
Number of outgoing power jumper contacts: 2
Indicators: LED (A, E) green: Function AO 1, AO 2
Marking: ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I
Brand |
WAGO |
|
£523.04
per 1 (ex. VAT)£627.65
per 1 (inc. VAT)
2-channel analog output - 4 … 20 mA, Intrinsically safe
This analog output module transmits intrinsically safe 4–20 mA signals in Zone 0+1 hazardous areas. The WAGO I/O System 750 must be installed either in Zone 2 or in a non-hazardous area.
Power is derived from the power jumper contacts. The outputs are short-circuit-protected.
Indicators:
• Green LED (output status)
Field and system levels are electrically isolated.
Number of analog outputs: 2
Total number of channels (module): 2
Signal type: Current
Signal type: 4 … 20 mADC
Actuator connection: 2 x (2-wire)
Signal characteristics: Single-ended
Resolution [bit]: 12Bit
Conversion time (typ.): 2ms
Linearity: ± 2 LSB
Output error, reference temperature: 25.°C
Output error, deviation (max.) of the upper-range value: 0.2%
Temperature coefficient: 0.01%/K
Load impedance (current output): ≤ 500 Ω
Intrinsic safety Ex i: Yes
Data width: 2 x 16-bit data
Supply voltage (system): 5 VDC; via data contacts
Current consumption (5 V system supply): 21mA
Supply voltage (field): 24 VDC; (Ex i power supply: UO = max. 27.3 V); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Current consumption, field supply (module with no external load): 19mA
Power consumption Pmax.: 1.5 W
Power loss Pl: 0.9 W
Isolation: 300 VAC system/supply
Number of incoming power jumper contacts: 2
Number of outgoing power jumper contacts: 2
Indicators: LED (A, E) green: Function AO 1, AO 2
Marking: ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I
Brand |
WAGO |
|
