VDE/UL/EAC THERMOSTAT -10/+50°C N/O - BLUE

THERMOSTAT SWITCH NO NORMALLY OPEN
KTS 111


The mechanical thermostat closes when the temperature rises and is used for regulating filter fans, heat exchangers, coolers or switching signal devices in the event that the temperature limit is exceeded. Supply lines are prevented from coming loose by push-in terminals.
• Supply lines fixed in place by push-in terminals
• Saves time as no tools are required for connection
• Easy to adjust due to large adjustment dial
• Optimised air inlet
• Can be used at altitudes of up to 5,000 m

Switch temperature difference: 7 K (±4 K tolerance)
Sensor element: thermostatic bimetal
Contact type: snap-action contact
Service life: 100,000 cycles verified
Max. operating voltage, frequency range: AC 250 V, 50-60 Hz
Max. inrush current: AC 16 A for 10 s
Connection*: 2 Push-In clamps, rigid wire 2.5 mm² (AWG 14), stranded wire1 1.5 mm² (AWG 16)
Mounting: clip for 35 mm DIN rail, EN 60715
Casing: plastic according to UL94 V-0, light grey
Dimensions: 60 x 33 x 41 mm
Weight: ~ 40 g
Fitting position: variable
Operating/Storage temperature: -45 to +80 °C (-49 to +176 °F)
Operating/Storage humidity: < 90 % RH (non-condensing)
Protection type/Protection class: IP20 / II
Overvoltage category/Altitude: II: up to 5,000 m; III: up to 2,000 m

* Stripped length of rigid wire: 10 to 12 mm. When connecting with wires, wire end ferrules must be used (square or trapezoid crimp). Length of wire end ferrule: 10 mm or 12 mm.