My Part Number:
Part Number: MIS-H-320B-1-HH-100
Multiples of: 1 | Minimum Order: 1
Magnetic Inductive Flow Meter MIS
The new flowmeter MIS was developed for measuring and monitoring medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifier.
The flow rate will be calculated based on the cross sectional area of the pipe.
The measurement is not depending on the process liquid and its material properties such as density, viscosity and temperature. Two given outputs can be set to be switch, analogue or frequency. Also a dosing function can be selected, where output 1 is set as switch NPN / PNP / PP and output 2 is set as control input.
Options/Features:
IO-Link, dosing function, rotatable TFT display, bidirectional measurement,
part- and grand totalizer, usable even with hand gloves
Brand |
KOBOLD INSTRUMENTS |
|
Display Type |
TFT |
|
Electrical Connection |
M12 x 1 |
|
IP Rating |
IP67 |
|
Body Material |
Steel |
|
Number Of Pins |
4 |
|
Supply Voltage |
24 V DC |
|
Communication Protocol |
IO Link |
|
Acceptable Media |
Conductive Liquid |
|
Wetted Parts |
Hard rubber |
|
Seal Material |
NBR |
|
Measuring Principle |
Electromagnetic |
|
Process Connection |
DN50, PN16 |
|
Minimum Sensing Range |
5 L/min |
|
Maximum Sensing Range |
1,167 L/min |
|
Output Signal |
1 x 4-20 mA/0-10 V/PP, 1 x NPN/PNP/PP |
|
Maximum Ambient Temperature |
60 °C |
|
Maximum Pressure |
16 bar |
|
Maximum Media Temperature |
70 °C |
|
£1,688.00
per 1 (ex. VAT)£2,025.60
per 1 (inc. VAT)
Magnetic Inductive Flow Meter MIS
The new flowmeter MIS was developed for measuring and monitoring medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifier.
The flow rate will be calculated based on the cross sectional area of the pipe.
The measurement is not depending on the process liquid and its material properties such as density, viscosity and temperature. Two given outputs can be set to be switch, analogue or frequency. Also a dosing function can be selected, where output 1 is set as switch NPN / PNP / PP and output 2 is set as control input.
Options/Features:
IO-Link, dosing function, rotatable TFT display, bidirectional measurement,
part- and grand totalizer, usable even with hand gloves
Brand |
KOBOLD INSTRUMENTS |
|
Display Type |
TFT |
|
Electrical Connection |
M12 x 1 |
|
IP Rating |
IP67 |
|
Body Material |
Steel |
|
Number Of Pins |
4 |
|
Supply Voltage |
24 V DC |
|
Communication Protocol |
IO Link |
|
Acceptable Media |
Conductive Liquid |
|
Wetted Parts |
Hard rubber |
|
Seal Material |
NBR |
|
Measuring Principle |
Electromagnetic |
|
Process Connection |
DN50, PN16 |
|
Minimum Sensing Range |
5 L/min |
|
Maximum Sensing Range |
1,167 L/min |
|
Output Signal |
1 x 4-20 mA/0-10 V/PP, 1 x NPN/PNP/PP |
|
Maximum Ambient Temperature |
60 °C |
|
Maximum Pressure |
16 bar |
|
Maximum Media Temperature |
70 °C |
|
