RFID NON CONTACT SW.SER.DIAG

Product features

• Universal coding with RFID technology
• 1 x connector socket M12, 8-pole
• Actuation from side
• Max. 31 sensors can be wired in series.
• Serial diagnostic output
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet


General data

Standards: EN IEC 60947-5-3, EN IEC 61508, EN ISO 13849-1
Coding: Universal coding
Coding level according to EN ISO 14119: Low
Working principle: RFID
Frequency band RFID: 125kHz
Transmitter output RFID, maximum: -6dBm
Housing construction form: Block
Installation conditions (mechanical): not flush
Sensor topology: Sensor for series wiring
Housing material: Glass-fibre, reinforced thermoplastic
Reaction time, maximum: 100ms
Duration of risk, maximum: 200ms
Reaction time, switching off safety outputs via actuator, maximum: 100ms
Reaction time, switching off safety outputs via safety inputs, maximum: 0.5ms
Gross weight: 100g


General data - Features

Serial diagnostics: Yes
Latching: Yes
Short circuit detection: Yes
Cross-circuit detection: Yes
Series-wiring: Yes
Safety functions: Yes
Cascadable: Yes
Integral system diagnostics, status: Yes
Number of LEDs: 3
Number of semi-conductor outputs with signaling function: 1
Number of fail-safe digital outputs: 2
Number of series-wiring of sensors: 31