My Part Number:
Part Number: FTD01163.00-01
Manufacturer Code: 01163.0-01
Multiples of: 1 | Minimum Order: 1
TAMPER-PROOF DUAL THERMOSTAT
FTD 011
Pre-set thermostat NC (normally closed) and thermostat NO (normally open) in a single enclosure. Unlike thermostats with change-over contact, the dual thermostat switches independently. This allows heaters and coolers to be switched in different temperature ranges.
• NC thermostat (heating) and NO thermostat (cooling) in a single enclosure
• Snap-action contact enables independent switching
• Pre-set temperature
• High-precision control
• Clip-mounted
Sensor element: thermostatic bimetal
Contact type: snap-action contact
Service life: > 100,000 cycles
Max. switching capacity: AC 250 V, 5 (1,6) A / AC 120 V, 10 (2) A, DC 30 W
Max. inrush current: AC 16 A for 10 s
Connection: 4-pole terminal, clamping torque 0.8 Nm max.: rigid wire 2.5 mm² (AWG 14), stranded wire1 1.5 mm² (AWG 16)
Mounting: clip for 35mm DIN rail, EN 60715
Casing: plastic according to UL94 V-0, light grey
Dimensions: 47 x 63 x 33 mm
Weight: ~ 40 g
Fitting position: variable
Operating/Storage temperaure: -40 to +80 °C (-40 to +176 °F) / -45 to +80 °C (-49 to +176 °F)
Operating/Storage humidity: < 90% RH (non-condensing)
Protection type: IP20
Approvals: VDE, UL File No. E164102, EAC
Brand |
STEGO |
|
£18.38
per 1 (ex. VAT)£22.06
per 1 (inc. VAT)
TAMPER-PROOF DUAL THERMOSTAT
FTD 011
Pre-set thermostat NC (normally closed) and thermostat NO (normally open) in a single enclosure. Unlike thermostats with change-over contact, the dual thermostat switches independently. This allows heaters and coolers to be switched in different temperature ranges.
• NC thermostat (heating) and NO thermostat (cooling) in a single enclosure
• Snap-action contact enables independent switching
• Pre-set temperature
• High-precision control
• Clip-mounted
Sensor element: thermostatic bimetal
Contact type: snap-action contact
Service life: > 100,000 cycles
Max. switching capacity: AC 250 V, 5 (1,6) A / AC 120 V, 10 (2) A, DC 30 W
Max. inrush current: AC 16 A for 10 s
Connection: 4-pole terminal, clamping torque 0.8 Nm max.: rigid wire 2.5 mm² (AWG 14), stranded wire1 1.5 mm² (AWG 16)
Mounting: clip for 35mm DIN rail, EN 60715
Casing: plastic according to UL94 V-0, light grey
Dimensions: 47 x 63 x 33 mm
Weight: ~ 40 g
Fitting position: variable
Operating/Storage temperaure: -40 to +80 °C (-40 to +176 °F) / -45 to +80 °C (-49 to +176 °F)
Operating/Storage humidity: < 90% RH (non-condensing)
Protection type: IP20
Approvals: VDE, UL File No. E164102, EAC
Brand |
STEGO |
|
