My Part Number:
Part Number: 751-9301
Manufacturer Code: 751-9301
Multiples of: 1 | Minimum Order: 1
Compact Controller 100 - 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485, 2 x ETHERNET, SD
Communication: Modbus (TCP, UDP), EtherCAT® Master, EtherNet/IPTM Adapter (slave), EtherNet/IPTM Scanner, Modbus RTU, RS-485 interface, OPC UA Server/Client, MQTT, Telecontrol protocols, requires an additional license, BACnet/IP, requires an additional license
ETHERNET protocols: DHCP, DNS, NTP, FTP, FTPS, SNMP, HTTP, HTTPS, SSH
Visualization: Web-Visu
Operating system: Real-time Linux (with RT-Preempt patch)
CPU: Cortex A7; 650 MHz
Programming languages per IEC 61131-3: Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), Continuous Function Chart (CFC), Structured Text (ST), Sequential Function Chart (SFC)
Programming environment: CODESYS V3.5, Node RED
Configuration options: CODESYS V3.5, ETHERNET Settings, Web-Based Management, WAGOupload, WAGO Solution Builder
Baud rate (communication/fieldbus 1): 10/100 Mbit/s
Baud rate: ETHERNET: 10/100 Mbit/s
Transmission medium (communication/fieldbus): ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Main memory (RAM): 512MB
Internal memory (flash): 4096MB
Non-volatile hardware memory: 128kbyte
Program memory: 32 MB
Data memory: 128 MB
Non-volatile software memory: 128.kbyte
Type of memory card: microSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card)
Memory card slot: Push-push mechanism
Indicators: LED (SYS, RUN), red/green: Status of system; LED (USR) red/green: User programmable status (can be used via CODESYS library); LED (SD) orange: Status of microSD; LED (LNK/ACT) green: Network connection via ports 1 … 2; LED (DI1 … 8) green: Status of inputs; LED (DO1 … 4) green: Status of outputs
Controls: Operating mode switch (RUN, STOP, RESET); reset button
Supply voltage (system): 24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (system) max.: 500mA
Supply voltage (field): 24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (field) max. (digital outputs, Uin+): 2,000mA
Isolation: 1250 V (DC 1 min., between system and field level (digital outputs))
Number of digital inputs: 8
Input characteristic: Type 3 (per EN 61131-2)
Number of digital outputs: 4
Output current (per channel): 500 mA (DC)
Output current: Short-circuit-protected
Signal type: Voltage, Resistance measurement
Signal type: 0 … 10 VDC
Number of analog inputs: 2
Resolution of analog inputs: 16Bit
Number of analog outputs: 2
Resolution of analog outputs: 12Bit
Load impedance (voltage output): ≥ 5 kΩ
Number of measurement inputs: 2
Temperature range: −60 … 350 °C, Pt1000, Ni1000
Brand |
WAGO |
|
£464.24
per 1 (ex. VAT)£557.09
per 1 (inc. VAT)
Compact Controller 100 - 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485, 2 x ETHERNET, SD
Communication: Modbus (TCP, UDP), EtherCAT® Master, EtherNet/IPTM Adapter (slave), EtherNet/IPTM Scanner, Modbus RTU, RS-485 interface, OPC UA Server/Client, MQTT, Telecontrol protocols, requires an additional license, BACnet/IP, requires an additional license
ETHERNET protocols: DHCP, DNS, NTP, FTP, FTPS, SNMP, HTTP, HTTPS, SSH
Visualization: Web-Visu
Operating system: Real-time Linux (with RT-Preempt patch)
CPU: Cortex A7; 650 MHz
Programming languages per IEC 61131-3: Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), Continuous Function Chart (CFC), Structured Text (ST), Sequential Function Chart (SFC)
Programming environment: CODESYS V3.5, Node RED
Configuration options: CODESYS V3.5, ETHERNET Settings, Web-Based Management, WAGOupload, WAGO Solution Builder
Baud rate (communication/fieldbus 1): 10/100 Mbit/s
Baud rate: ETHERNET: 10/100 Mbit/s
Transmission medium (communication/fieldbus): ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Main memory (RAM): 512MB
Internal memory (flash): 4096MB
Non-volatile hardware memory: 128kbyte
Program memory: 32 MB
Data memory: 128 MB
Non-volatile software memory: 128.kbyte
Type of memory card: microSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card)
Memory card slot: Push-push mechanism
Indicators: LED (SYS, RUN), red/green: Status of system; LED (USR) red/green: User programmable status (can be used via CODESYS library); LED (SD) orange: Status of microSD; LED (LNK/ACT) green: Network connection via ports 1 … 2; LED (DI1 … 8) green: Status of inputs; LED (DO1 … 4) green: Status of outputs
Controls: Operating mode switch (RUN, STOP, RESET); reset button
Supply voltage (system): 24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (system) max.: 500mA
Supply voltage (field): 24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (field) max. (digital outputs, Uin+): 2,000mA
Isolation: 1250 V (DC 1 min., between system and field level (digital outputs))
Number of digital inputs: 8
Input characteristic: Type 3 (per EN 61131-2)
Number of digital outputs: 4
Output current (per channel): 500 mA (DC)
Output current: Short-circuit-protected
Signal type: Voltage, Resistance measurement
Signal type: 0 … 10 VDC
Number of analog inputs: 2
Resolution of analog inputs: 16Bit
Number of analog outputs: 2
Resolution of analog outputs: 12Bit
Load impedance (voltage output): ≥ 5 kΩ
Number of measurement inputs: 2
Temperature range: −60 … 350 °C, Pt1000, Ni1000
Brand |
WAGO |
|
