2AI PROFINET MODULE

Profinet IO module with 2 analog inputs


ZE-2AI-P is an I/O module with 2 analog inputs, and 1 Ethernet port, and supports PROFINET IO communication. The module has isolation between the inputs and low voltage circuits of 1,500 Vac. Configuration can be done via CODESYS softPLC software and TiA Portal/Simatic Step7 design environment.


Power supply: 10..40 Vdc / 19..28 Vac
Power absorption: 1,5W @ 24Vdc, Max: 2W
Isolation: 1,5 kVac
Protection degree: IP20
Status led indicators: Power supply / IP address, Rx/Tx Profinet, Tx Ethernet, Link Ethernet, Inputs/outputs status, Fail
Operating temperature: -25..+70°C
Storage temperature: -30..+85°C
Humidity: 30..90% non-condensing
Dimension: 17,5x102,5x111 mm
Weight: about 110 g
Housing: PA6, black color
Connections: Removable screw terminals for conductors up to 2.5 mm2, IDC10 rear connector for DIN rail 46277, RJ45
Mounting: 35 mm DIN rail guide 46277
Configuration: DIP Switch (default configuration), CODESYS softPLC software, TiA Portal/Simatic Step7, Web Server
Interface: Nr. 1 Ethernet 10/100 Mbps
Speed: Up to 115.200 bps / 100 Mbps (TCP-IP)
Supported protocols: Profinet IO
Analog inputs: Nr. 2 analog inputs
Type of analog inputs: 0..20 mA / 0..30 V, max resolution 16 bit, protection 40V / 25mA
Standard: CE